Pressure control and conformance management for safe and Efficient CO2 storage - Accelerating CCS technologies (Pre-ACT)
The objective of the Pre-ACT project (2017-2020) was to equip operators and regulators with pressure-driven decision support protocols (Pre-ACT Protocols) that enable them to establish a safe and efficient monitoring system and to assess quantitatively site conformance. These protocols can be adjusted to each project phase yet provide a common basis for decision making during operation and at site handover.
Pre-ACT Final Report (1 September 2020)
![Pre-ACT Final Report (1 September 2020)](/contentassets/f4a3c4d95cd4439ca8054b7f2d0439b3/final-report---front-page.png?width=1080&height=608&mode=crop&scale=both&quality=80)
Pressure control and conformance management for safe and efficient CO2 storage - Accelerating CCS Technologies. Eliasson, P. et al. 1 September 2020
Pre-ACT webinar recordings (spring 2020)
Webinar 1: Pre-injection reservoir modelling and geomechanical testing |
Webinar 2: Conformance monitoring and decision making |
Webinar 3: Impact of brine discharge (for pressure management) |
Webinar 4: Geophysical pressure and saturation quantification |
Webinar 5: Smeaheia, Endurance, and depleted gas field case studies |
Webinar 6: Svelvik CO2 Field Lab injection campaign |
![Pre-ACT Webinar #5 (20 May 2020) - Part 1: Case study: Smeaheia - effect of faults and heterogeneities on CO2 storage capacity (Ane Lothe, SINTEF), Part 2: Case study: Building heterogeneous reservoir realisations using the Endurance structure, UK (Jim White, BGS), Part 3: Case study: Conformance verification of injection well in depleted gas reservoir, the Dutch sector (Eduardo Barros, TNO)](https://img.youtube.com/vi/CMHzquZJSHc/sddefault.jpg)
Pre-ACT Webinar #5 (20 May 2020) - Part 1: Case study: Smeaheia - effect of faults and heterogeneities on CO2 storage capacity (Ane Lothe, SINTEF), Part 2: Case study: Building heterogeneous reservoir realisations using the Endurance structure, UK (Jim White, BGS), Part 3: Case study: Conformance verification of injection well in depleted gas reservoir, the Dutch sector (Eduardo Barros, TNO)