A European consortium consisting of 25 leading organisations in the hydrogen sector are joining forces to define, develop and test the first European standard for fuel cell modules for heavy duty applications. This standard for fuel cell modules may be the game changer that the fuel cell industry requires to enhance market competitiveness by enabling competition, cost reduction and mass production. The consortium operating together as “StasHH” comprises 11 fuel cell module suppliers, 9 original equipment manufacturers and 5 research, test, engineering and/or knowledge institutes and will standardise physical dimensions, flow and digital interfaces, test protocols and safety requirements of the fuel cell modules that can be stacked and integrated in heavy duty applications like forklifts, buses, trucks, trains, ships, and construction equipment. The consortium receives 7.5 M€ funding from the European Union, through the Fuel Cells and Hydrogen Joint Undertaking, in order to kickstart the adoption of fuel cells in the heavy duty sector. The total budget is 15.2 M€.
The size nomenclature for batteries has been well established over time and became known as the “AA-series” nomenclature and has resulted in a rapid adoption of battery technologies into a wide variety of applications. A similar nomenclature, denoted as the “HH-series” is envisioned by the StasHH consortium for fuel cell modules, which are at the heart of any fuel cell system. Upon reaching an industrial consensus between fuel cell module suppliers and OEMs regarding the standard, the fuel cell module suppliers in the consortium will design and develop standardised modules for different power classes. The modules will be tested by the test centres in the consortium upon key indicators to benchmark performance and safety. Meanwhile the consortium will make a committed and devoted effort to promote the standard at the appropriate European and international regulation, codes and standards platforms to enable the worldwide adoption of the standard. Proper dissemination is guaranteed and exploitation efforts to external fuel cell module suppliers and OEMs is foreseen.
The 25 organisations that are part of the StasHH consortium are Alstom Transport SA, AVL List GmbH, Ballard Power Systems Europe A/S, Centro per gli Studi di Tecnica Navale CETENA S.p.A., Commissariat à l’Energie Atomique et aux Energies Alternatives, DAMEN, ElringKlinger Fuelcell Systems Austria GmbH, FCP Fuel Cell Powertrain GmbH, FEV Europe GmbH (supported by FEV Software and Testing Solutions GmbH), Freudenberg FST GmbH, Future Proof Shipping BV, Hydrogenics GmbH (now part of Cummins), Intelligent Energy Limited, Nedstack Fuel Cell Technology BV, Netherlands Organization for Applied Scientific Research (TNO), Nuvera Fuel Cells Europe, Proton Motor Fuel Cell GmbH, SINTEF AS, Solaris Bus & Coach sp. z o.o., Symbio SAS, Toyota Motor Europe NV/SA, VDL Enabling Transport Solutions BV, VDL Energy Systems, Volvo Construction Equipment (supported by Volvo Technology and Volvo Penta), WaterstofNet vzw.
The StasHH project has received funding from the Fuel Cells and Hydrogen 2 Joint Undertaking under Grant Agreement No 101005934. This Joint Undertaking receives support from the European Union’s Horizon 2020 Research and Innovation programme, Hydrogen Europe and Hydrogen Europe Research.
