To main content

Bubble evolution on different carbon anode designs in cryolite melt

Abstract

The anode potential has been shown to be highly dependent on anode geometry and orientation in the Hall–Héroult process. This work is an experimental laboratory scale study of the effect of anode geometry and orientation on bubble formation and detachment for four different anode designs: horizontal (surface facing downwards), inverted horizontal (surface facing upwards), vertical, rod (with both vertical and horizontal surface). From polarization curves, it was found that the vertical anode and the inverted horizontal anode operated at lowest potentials. Above 1 A cm−2, the vertical anode showed the lowest potential. As the current increases, the transition towards smaller noise is pronounced for the horizontal anode and to some degree for the vertical anode and inverted horizontal anode. Fast Fourier Transform analysis of chronoamperometric data gave a dominant frequency only for the horizontal anode and the rod anode. The bubble release time corresponded well with the dominant frequency for the rod anode for all current densities and for the horizontal anode at lower current densities. Only random bubble noise was found for the vertical and the inverted horizontal anode and is probably due to a bubble-induced convection effectively removing the bubbles.
Read publication

Category

Academic article

Language

English

Author(s)

Affiliation

  • Norwegian University of Science and Technology
  • SINTEF Industry / Metal Production and Processing

Year

2020

Published in

Metallurgical and Materials Transactions B

ISSN

1073-5615

Publisher

Springer

Volume

51

Issue

3

Page(s)

1243 - 1253

View this publication at Cristin