Publikasjoner Forskningsgruppe Materialers integritet og sveising

2023

Bunaziv, Ivan; Danielsen, Morten Høgseth; Eriksson, Magnus; Ma, Xiang; Ren, Xiaobo; Godinez-Brizuela, Omar E.; Skjetne, Paal.
Numerical modelling of high-power laser spot melting of thin stainless steel.
IOP Conference Series: Materials Science and Engineering 2023 ;Volum 1296.

Bunaziv, Ivan; Ren, Xiaobo; Hagen, Anette Brocks; Hovig, Even Wilberg; Jevremovic, Ivana; Gulbrandsen-Dahl, Sverre.
Laser beam remelting of stainless steel plate for cladding and comparison with conventional CMT process.
The International Journal of Advanced Manufacturing Technology 2023 ;Volum 127. s. 911-934

Bunaziv, Ivan; Ren, Xiaobo; Olden, Vigdis.
A comparative study of laser-arc hybrid welding with arc welding for fabrication of offshore substructures.
Journal of Physics: Conference Series (JPCS) 2023 ;Volum 2626.

Campari, Alessandro; Alvaro, Antonio; Ustolin, Federico; Paltrinieri, Nicola.
Toward Risk-based Inspection of Hydrogen Technologies: a Methodology for the Calculation of the Damage Factor of Hydrogen Embrittlement.
Chemical Engineering Transactions 2023 ;Volum 98. s. 165-170

Campari, Alessandro; Nakhal Akel, Antonio Javier; Ustolin, Federico; Alvaro, Antonio; Ledda, Alessandro; Agnello, Patrizia; Moretto, Pietro; Patriarca, Riccardo; Paltrinieri, Nicola.
Lessons learned from HIAD 2.0: Inspection and maintenance to avoid hydrogen-induced material failures.
Computers and Chemical Engineering 2023 ;Volum 173.

Campari, Alessandro; Ustolin, Federico; Alvaro, Antonio; Paltrinieri, Nicola.
A review on hydrogen embrittlement and risk-based inspection of hydrogen technologies.
International Journal of Hydrogen Energy 2023 ;Volum 48.(90) s. 35316-35346

Dæhli, Lars Edvard Blystad; Olufsen, Sindre Nordmark; Kristensen, Tore Andre; Børvik, Tore; Hopperstad, Odd Sture.
Influence of constituent particles on fracture of aluminum alloys under high-triaxiality loading.
Materials Science & Engineering: A 2023 ;Volum 864. s. 1-16

Giannini, Leonardo; Alvaro, Antonio; Campari, Alessandro; Paltrinieri, Nicola.
Materials for Hydrogen Storage and Transport: Implications for Risk-Based Inspection.
Key Engineering Materials 2023 ;Volum 959.(3) s. 221-230

Saksala, Timo; Rubio Ruiz, Rafael Arturo; Kane, Pascal-Alexandre Saidou; Hokka, Mikko.
Weakening of Compressive Strength of Granite by Piezoelectric Actuation of Quartz Using High-Frequency and High-Voltage Alternating Current: A 3D Numerical Study.
Rock Mechanics and Rock Engineering 2023

Saksala, Timo; Ruiz, Arturo Rubio; Kane, Pascal-Alexandre Saidou; Hokka, Mikko.
Weakening of tensile strength of granitic rock by HV-HF-AC actuation of piezoelectric properties of Quartz: a 3D numerical study.
IOP Conference Series: Earth and Environmental Science (EES) 2023

Saksala, Timo; Ruiz, Arturo Rubio; Kouhia, Reijo; Kane, Pascal-Alexandre Saidou; Hokka, Mikko.
Modelling of fatigue damage in granitic rock by piezoelectric effect in quartz phase due to alternating current excitation.
Geomechanics and Geophysics for Geo-Energy and Geo-Resources 2023 ;Volum 9. s. -

Solfiti, Emanuele; Viespoli, Luigi Mario; Lervåg, Malin; Kristensen, Tore Andre; Esposito, Raffaele; Calviani, Marco; Ximenes, Rui; Berto, Filippo; Alvaro, Antonio.
Experimental characterization of cyclic behaviour of pure lead: Temperature sensitivity and strain-rate effects.
Materials Science & Engineering: A 2023 ;Volum 874.

Solfiti, Emanuele; Wan, Di; Celotto, Ambra; Solieri, N.; Muñoz, P.A.; Ximenes, R.F.; Heredia, J.M.; Torregrosa Martin, Martin; Perillo-Marcone, A.; Nuiry, F.X.; Alvaro, Antonio; Berto, Filippo; Calviani, M..
FIB-SEM investigation and uniaxial compression of flexible graphite.
Materials & design 2023 ;Volum 233. s. –

Xu, Yijiang; Langelandsvik, Geir; Bunaziv, Ivan; Li, Yanjun.
Understanding the inoculation of aluminium grains during welding under the influences of high cooling rate and high temperature gradient.
IOP Conference Series: Materials Science and Engineering 2023 ;Volum 1281. s. –

 

2022

Wang, Dong; Hagen, Anette Brocks; Undrum Fathi, Pernille; Lin, Meichao; Johnsen, Roy; Lu, Xu
Investigation of hydrogen embrittlement behavior in X65 pipeline steel under different hydrogen charging conditions.
Materials Science & Engineering: A 2022 ;Volum 860

Wan, Di; Hagen, Anette Brocks; Viespoli, Luigi Mario; Johanson, Audun; Berto, Filippo; Alvaro, Antonio
In-situ tensile and fatigue behavior of electrical grade Cu alloy for subsea cables.
Materials Science & Engineering: A 2022 ;Volum 835

Viespoli, Luigi Mario; Johanson, Audun; Dumoulin, Stephane; Hagen, Anette Brocks; Wan, Di; Berto, Filippo; Alvaro, Antonio
Impact of conductor assembly indentation on the fatigue properties of copper power cable wires.
Procedia Structural Integrity 2022 ;Volum 42. s.1336-1343

Sauder, Thomas Michel; Maincon, Philippe Emmanuel; Lone, Erling Neerland; Leira, Bernt Johan
Estimation of top tensions in mooring lines by sensor fusion.
Marine Structures 2022 ;Volum 86. s.1-18

Myhre, Aleksander Omholt; Sendrowicz, Aleksander; Alvaro, Antonio; Vinogradov, Alexei
Digital Image Correlation Technique to Aid Monotonic and Cyclic Testing in a Noisy Environment during In Situ Electrochemical Hydrogen Charging.
Metals 2022 ;Volum 13.(1) s.1-10

Liu, Siqi; Chang, Zexin; Fu, Yuequn; liu, yuyu; Lin, Meichao; Ren, Xiaobo; Wang, Wenxian; Zhang, Zhiliang; He, Jianying
Nanoscale creep behavior and its size dependency of a Zr-based bulk metallic glass manufactured by selective laser melting.
Materials & design 2022 ;Volum 218

Lin, Meichao; Yu, Haiyang; Wang, Xu; wang, ruijun; Ding, Yu; Alvaro, Antonio; Olden, Vigdis; He, Jianying; Zhang, Zhiliang
A microstructure informed and mixed-mode cohesive zone approach to simulating hydrogen embrittlement.
International Journal of Hydrogen Energy 2022 ;Volum 47.(39) s.17479-17493

Lin, Meichao; Yu, Haiyang; Ding, Yu; Wang, Gang; Olden, Vigdis; Alvaro, Antonio; He, Jianying; Zhang, Zhiliang
A predictive model unifying hydrogen enhanced plasticity and decohesion.
Scripta Materialia 2022 ;Volum 215. s.1-6

Lin, Meichao; Yu, Haiyang; Ding, Yu; Olden, Vigdis; Alvaro, Antonio; He, Jianying; Zhang, Zhiliang
Simulation of ductile-to-brittle transition combining complete Gurson model and CZM with application to hydrogen embrittlement.
Engineering Fracture Mechanics 2022 ;Volum 268

Hidle, Einar Løvli; Hestmo, Rune Harald; Adsen, Ove Sagen; Lange, Hans Iver; Vinogradov, Alexei
Early Detection of Subsurface Fatigue Cracks in Rolling Element Bearings by the Knowledge-Based Analysis of Acoustic Emission.
Sensors 2022 ;Volum 22.(14)

Hagen, Anette Brocks; Wenner, Sigurd; Bjørge, Ruben; Wan, Di; Marioara, Calin Daniel; Holmestad, Randi; Ringdalen, Inga Gudem
Local mechanical properties and precipitation inhomogeneity in large-grained Al–Mg–Si alloy.
Materials Science & Engineering: A 2022 ;Volum 872

Evjemo, Linn Danielsen; Langelandsvik, Geir; Moe, Signe; Danielsen, Morten Høgseth; Gravdahl, Jan Tommy.
Wire-arc additive manufacturing of structures with overhang: Experimental results depositing material onto fixed substrate
CIRP - Journal of Manufacturing Science and Technology 2022 ;Volum 38. s.186-203

Bunaziv, Ivan; Langelandsvik, Geir; Ren, Xiaobo; Westermann, Ida; Rørvik, Gisle; Dørum, Cato; Danielsen, Morten Høgseth; Eriksson, Magnus Carl Fredrik
Effect of preheating and preplaced filler wire on microstructure and toughness in laser-arc hybrid welding of thick steel
Journal of Manufacturing Processes 2022 ;Volum 82. s.829-847

Bergh, Tina; Arbo, Siri Marthe; Hagen, Anette Brocks; Blindheim, Jørgen; Friis, Jesper; Khalid, Muhammad Zeeshan; Ringdalen, Inga Gudem; Holmestad, Randi; Westermann, Ida; Vullum, Per Erik.
On intermetallic phases formed during interdiffusion between aluminium alloys and stainless steel
Intermetallics (Barking) 2022 ;Volum 142

Akselsen, Odd Magne; Bjørge, Ruben; Ånes, Håkon Wiik; Ren, Xiaobo; Nyhus, Bård
Microstructure and properties of wire arc additive manufacturing of Inconel 625
Metals 2022 ;Volum 12.(11) s.1-18

2021

Wang, Dong; Hagen, Anette Brocks; Wan, Di; Lu, Xu; Johnsen, Roy
Probing hydrogen effect on nanomechanical properties of X65 pipeline steel using in-situ electrochemical nanoindentation.
Materials Science & Engineering: A 2021 ;Volum 824 s1-10

Viespoli, Luigi Mario; Panza, Luigi; Johanson, Audun; Alvaro, Antonio; Soma, Aurelio; Berto, Filippo
Tape winding angle influence on subsea cable sheathing fatigue performance.
Engineering structures 2021 ;Volum 229

Ustolin, Federico; Wan, Di; Alvaro, Antonio; Paltrinieri, Nicola
Risk-based inspection planning for hydrogen technologies: review of currents standards and suggestions for modification.
IOP Conference Series: Materials Science and Engineering 2021 ;Volum 1193

Sun, Li; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang
Melting cell based compensated design method for improving dimensional accuracy of additively manufactured thin channels
International Journal of Precision Engineering and Manufacturing - Green Technology 2021 ;Volum 9. s.383-394

Melting cell based compensated design method for improving dimensional accuracy of additively manufactured thin channels
A bead sequence-driven deposition pattern evaluation criterion for lowering residual stresses in additive manufacturing.
Additive Manufacturing 2021 ;Volum 48

Paudel, Gagan; Langelandsvik, Geir; Khromov, Sergey; Arbo, Siri Marthe; Westermann, Ida; Roven, Hans Jørgen; Di Sabatino Lundberg, Marisa
Depth Profiling at a Steel-aluminum Interface Using Slow-flow Direct Current Glow Discharge Mass Spectrometry.
Atomic spectroscopy 2021 ;Volum 43.(2) s.126-133

Ogawa, Yuhei; Nishida, Haruki; Nakamura, Masami; Olden, Vigdis; Vinogradov, Alexey; Matsunaga, Hisao
Dual roles of pearlite microstructure to interfere/facilitate gaseous hydrogen-assisted fatigue crack growth in plain carbon steels.
International Journal of Fatigue 2021 ;Volum 154

Moreno, Edgardo; Viespoli, Luigi Mario; Johanson, Audun; Wan, Di; Alvaro, Antonio; Soma, Aurelio; Berto, Filippo
Effect of Geometrical Irregularities on Fatigue of Lead Sheathing for Submarine High Voltage Power Cable Applications.
International Journal of Fatigue 2021 ;Volum 151

Liu, Siqi; Wan, Di; Guan, Shuai; Fu, Yuequn; Ren, Xiaobo; Zhang, Zhiliang; He, Jianying
Microstructure and nanomechanical behavior of an additively manufactured (CrCoNiFe)94Ti2Al4 high-entropy alloy.
Materials Science & Engineering: A 2021 ;Volum 823

Liu, Siqi; Lin, Meichao; Wang, Xu; Fu, Yuequn; Ren, Xiaobo; Zhang, Zhiliang; He, Jianying
A framework for predicting the local stress-strain behaviors of additively manufactured multiphase alloys in the sequential layers.
Materials Science & Engineering: A 2021 ;Volum 832. s.1-10

Langelandsvik, Geir; Eriksson, Magnus Carl Fredrik; Akselsen, Odd M.; Roven, Hans Jørgen
Wire arc additive manufacturing of AA5183 with TiC nanoparticles.
The International Journal of Advanced Manufacturing Technology 2021 s.1-12

Langelandsvik, Geir; Akselsen, Odd Magne; Furu, Trond; Roven, Hans Jørgen
Review of aluminum alloy development for wire arc additive manufacturing.
Materials 2021 ;Volum 14.(18) s.1-26

Hoang, Nguyen-Hieu; Maincon, Philippe Emmanuel; Philippe, David; Coudert, Térence; Bjørset, Arve; Sæther, Sturla.
Novel computational tool for efficient structural analyses of geothermal wells.
Geothermics 2021 ;Volum 92

Gruben, Gaute; Dillingh, Bert; Kaldal, Gunnar Skulason; Hoang, Nguyen-Hieu; Wollenweber, Jens; Rørvik, Gisle; Thorbjornsson, Ingólfur Ö; Nyhus, Bård
Thermo-mechanical tensile testing of geothermal casing materials.
Geothermics 2021 ;Volum 89

Bunaziv, Ivan; Dørum, Cato; Nielsen, Steen Erik; Suikkanen, Pasi; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Akselsen, Odd Magne
Root formation and metallurgical challenges in laser beam and laser-arc hybrid welding of thick structural steel.
The International Journal of Advanced Manufacturing Technology 2021 ;Volum 116. s.561-578

Bunaziv, Ivan; Dørum, Cato; Nielsen, Steen Erik; Suikkanen, Pasi; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Akselsen, Odd Magne
Root formation and mechanical properties in laser keyhole welding of 15 mm thick HSLA steel.
IOP Conference Series: Materials Science and Engineering 2021 ;Volum 1135

Bunaziv Ivan; Akselsen Odd Magne; Ren Xiaobo; Nyhus Bård; Eriksson Magnus Carl Fredrik; Gulbrandsen-Dahl Sverre
A Review on Laser-Assisted Joining of Aluminium Alloys to Other Metals.
Metals 2021 ;Volum 11(11)

Bunaziv, Ivan; Akselsen, Odd Magne; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Gulbrandsen-Dahl, Sverre
Laser Beam and Laser-Arc Hybrid Welding of Aluminium Alloys.
Metals 2021 ;Volum 11.(8)

Akselsen, Odd Magne; Bjørge, Ruben; Ånes, Håkon Wiik; Ren, Xiaobo; Nyhus, Bård
Effect of Sigma Phase in Wire Arc Additive Manufacturing of Superduplex Stainless Steel.
Metals 2021 ;Volum 11.(12)

2020

Wan, Di; Viespoli, Luigi Mario; Johanson, Audun; Hagen, Anette Brocks; Berto, Filippo; Alvaro, Antonio
Tensile and fatigue behavior of a Pb-Sn-Sb alloy investigated via small-scale in-situ mechanical testing in SEM.
Procedia Structural Integrity 2020 ;Volum 28. s.648-658

Viespoli, Luigi Mario; Johanson, Audun; Alvaro, Antonio; Nyhus, Bård; Berto, Filippo.
Subsea power cable sheathing: an investigation of lead fatigue performance.
Procedia Structural Integrity 2020 ;Volum 28. s.344-351

Sun, Li; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang
Numerical investigation of a novel pattern for reducing residual stress in additive manufacturing.
Journal of Materials Science & Technology 2020 ;Volum 67. s.11-22

Song, Xianfeng; Aamo, Ole Morten; Kane, Pascal-Alexandre; Detournay, Emmanuel.
Influence of weight-on-bit on percussive drilling performance.
Rock Mechanics and Rock Engineering 2020 s.1-15

Solfiti, Emanuele; Calviani, Marco; Perillo-Marcone, Antonio; Heredia, Jorge Maestre; Torregrosa, Claudio; Alvaro, Antonio; Berto, Filippo.
Flexible graphite as beam dumping material in the TDE blocks of the Large Hadron Collider.
Procedia Structural Integrity 2020 ;Volum 28. s.2228-2234

Saai, Afaf; Bjørge, Ruben; Dahl, Filip Erik Bo; Antonov, Maksim; Kane, Pascal-Alexandre; Diop, Jean-Baptiste; Ojala, Niko
Adaptation of Laboratory tests for the assessment of wear resistance of drill-bit inserts for rotarypercussive drilling of hard rocks.
Wear 2020; Volum 456-457

Mir, Zahid Mohammad; Bastos, Alexandre; Gomes, Celestino; Mueller, Urs; Alonso, Maria Cruz; Villar, Kristina; Rabade, Miguel P.; Maia, Frederico; Rocha, Cláudia M.; Maincon, Philippe Emmanuel; Höche, Daniel; Ferreira, Mario G. S.; Zheludkevich Mikhail L
Numerical and Experimental Analysis of SelfProtection in Reinforced Concrete due to Application of Mg–Al–NO₂ Layered Double Hydroxides.
Advanced Engineering Materials 2020 ;Volum 22.(11) s.1-13

Li, Yang; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang
Effect of thermal residual stresses on ductile-to-brittle transition of a bi-material specimen by using the CAFE method.
European Journal of Mechanics. A, Solids 2020 ;Volum 80. s.1-12

Li, Yang; Pallaspuro, Sakari; Ren, Xiaobo; He, Jianying; Kömi, Jukka; Zhang, Zhiliang
A multi-barrier model assisted CAFE method for predicting ductile-to-brittle transition with application to a low-carbon ultrahigh-strength steel.
Mechanics of materials (Print) 2020 ;Volum 153

Lervåg, Malin; Sørensen, Camilla; Robertstad, Andreas; Brønstad, Bård M.; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Aune, Ragnhild; Ren, Xiaobo; Akselsen, Odd Magne; Bunaziv, Ivan
Additive Manufacturing with Superduplex Stainless Steel Wire by CMT Process.
Metals 2020 ;Volum 10.(2)

Langelandsvik, Geir; Rangvaldsen, Olav; Flåm, Jan Eskil; Akselsen, Odd Magne; Roven, Hans Jørgen
Wire and Arc Additive Manufacturing with TiC-Nanoparticle Reinforced AA5183 Alloy.
MATEC Web of Conferences 2020 ;Volum 326

Langelandsvik, Geir; Horgar, Annbjørg; Furu, Trond; Roven, Hans Jørgen; Akselsen, Odd Magne
Comparative study of eutectic Al-Si alloys manufactured by WAAM and casting
The International Journal of Advanced Manufacturing Technology 2020 ;Volum 110.(3-4) s.935-947

Langelandsvik, Geir; Grandcolas, Mathieu; Skorpen, Kristian Grøtta; Furu, Trond; Akselsen, Odd Magne; Roven, Hans Jørgen
Development of AL-TIC wire feedstock for additive manufacturing by metal screw extrusion.
Metals 2020 ;Volum 10.(11) s.1-17

Langelandsvik, Geir; Furu, Trond; Reiso, Oddvin; Roven, Hans Jørgen
Effects of iron precipitation and novel metal screw extrusion on electrical conductivity and properties of AA1370 aluminium.
Materials Science & Engineering: B. Solid-state Materials for Advanced Technology 2020 ;Volum 254. s.1-8

Bunaziv, Ivan; Wenner, Sigurd; Ren, Xiaobo; Frostevarg, Jan; Kaplan, Alexander F.H.; Akselsen, Odd Magne
Filler metal distribution and processing stability in laser-arc hybrid welding of thick HSLA steel.
Journal of Manufacturing Processes 2020 ;Volum 54. s.228-239

Bunaziv, Ivan; Dørum, Cato; Nielsen, Steen Erik; Suikkanen, Pasi; Ren, Xiaobo; Nyhus, Bård; Eriksson, Magnus Carl Fredrik; Akselsen, Odd Magne
Laser-arc hybrid welding of 12- and 15-mm thick structural steel.
The International Journal of Advanced Manufacturing Technology 2020 ;Volum 107. s.2649-2669

2019

Yu, Haiyang; Olsen, Jim Stian; Alvaro, Antonio; Qiao, Lijie; He, Jianying; Zhang, Zhiliang.
Hydrogen informed Gurson model for hydrogen embrittlement simulation.
Engineering Fracture Mechanics 2019 ;Volum 217:106542. s.1-12

Wan, Di; Deng, Yun; Meling, Jan Inge Hammer; Alvaro, Antonio; Barnoush, Afrooz
Hydrogen-enhanced fatigue crack growth in a single-edge notched tensile specimen under in-situ hydrogen charging inside an environmental scanning electron microscope.
Acta Materialia 2019 ;Volum 170. s.87-99

Wan, Di; Alvaro, Antonio; Olden, Vigdis; Barnoush, Afrooz.
Hydrogen-enhanced fatigue crack growth behaviors in a ferritic Fe-3wt%Si steel studied by fractography and dislocation structure analysis.
International Journal of Hydrogen Energy 2019 ;Volum 44.(10) s.5030-5042

Viespoli, Luigi Mario; Leonardi, Andrea; Cianetti, Filippo; Nyhus, Bård; Alvaro, Antonio; Berto, Filippo
Low-temperature fatigue life properties of Aluminum butt weldments by the means of the local strain energy density approach.
Material Design & Processing Communications (MDPC) 2019 ;Volum 1(1)

Viespoli, Luigi Mario; Johanson, Audun; Alvaro, Antonio; Nyhus, Bård; Berto, Filippo
Strain controlled medium cycle fatigue of a notched Pb-Sn-Cd lead alloy.
Engineering Failure Analysis 2019 ;Volum 104. s.96-104

Viespoli, Luigi Mario; Johanson, Audun; Alvaro, Antonio; Nyhus, Bård; Berto, Filippo
Viespoli, Luigi Mario; Johanson, Audun; Alvaro, Antonio; Nyhus, Bård; Berto, Filippo.
Procedia Structural Integrity 2019 ;Volum 18. s.86-92

Tu, Shengwen; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang.
Stress-strain curves of metallic materials and post-necking strain hardening characterization: A Review.
Fatigue & Fracture of Engineering Materials & Structures (FFEMS) 2019 ;Volum 43.(1) s.3-19

Tu, Shengwen; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang
Experimental measurement of temperature-dependent equivalent stress-strain curves of a 420 MPa structural steel with axisymmetric notched tensile specimens.
Engineering Failure Analysis 2019 ;Volum 100. s.312-321

Tu, Shengwen; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang
Effect of the Lüders plateau on ductile fracture with MBL mode.
European Journal of Mechanics. A, Solids 2019 ;Volum 78

Sun, Li; Ren, Xiaobo; He, Jianying; Olsen, Jim Stian; Pallaspuro, Sakari; Zhang, Zhiliang
A new method to estimate the residual stresses in additive manufacturing characterized by point heat source.
The International Journal of Advanced Manufacturing Technology 2019 ;Volum 105.(5-6) s.2415-2429

Mir, Zahid Mohammad; Hoche, Daniel; Gomes, Celestino; Sampaio, Rui; Bastos, Alexandre C; Maincon, Philippe Emmanuel; Ferreira, M.G.S.; Zheludkevich, Mikhail L
Enhanced Predictive Modelling of Steel Corrosion in Concrete in Submerged Zone Based on a Dynamic Activation Approach.
International Journal of Concrete Structures and Materials 2019 ;Volum 13.(11) s.1-18

Li, Yang; Shterenlikht, Anton; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang
CAFE based Multi-scale Modelling of Ductile-to-Brittle Transition of Steel with a Temperature Dependent Effective Surface Energy.
Materials Science & Engineering: A 2019 ;Volum 755. s.220-230

Johanson, Audun; Viespoli, Luigi Mario; Alvaro, Antonio; Berto, Filippo.
Small and Full-Scale Fatigue Testing of Lead Cable Sheathing.
ISOPE - International Offshore and Polar Engineering Conference

Evjemo, Linn Danielsen; Langelandsvik, Geir; Gravdahl, Jan Tommy
Wire arc additive manufacturing by robot manipulator: Towards creating complex geometries.
IFAC-PapersOnLine 2019 ;Volum 52.(11) s.103-109

Bunaziv, Ivan; Olden, Vigdis; Akselsen, Odd Magne
Metallurgical Aspects in the Welding of Clad Pipelines—A Global Outlook.
Applied Sciences 2019 ;Volum 9.(15)

Bunaziv, Ivan; Frostevarg, Jan; Ren, Xiaobo; Kaplan, Alexander F.H.; Akselsen, Odd Magne
Porosity and solidification cracking in welded 45 mm thick steel by fiber laser-MAG process.
Procedia Manufacturing 2019 ;Volum 36. s.101-111

Bunaziv, Ivan; Dørum, Cato; Ren, Xiaobo; Eriksson, Magnus Carl Fredrik; Akselsen, Odd Magne
Application of LBW and LAHW for fillet welds of 12 and 15 mm structural stee.
Procedia Manufacturing 2019 ;Volum 36. s.121-130

Bunaziv, Ivan; Aune, Ragnhild; Olden, Vigdis; Akselsen, Odd Magne
Dry hyperbaric welding of HSLA steel up to 35 bar ambient pressure with CMT arc mode.
The International Journal of Advanced Manufacturing Technology 2019 ;Volum 105. s.2659-2676

Bunaziv, Ivan; Akselsen, Odd Magne; Frostevarg, Jan; Kaplan, Alexander F.H..
Correction to: Application of laser-arc hybrid welding of steel for low-temperature service.
The International Journal of Advanced Manufacturing Technology 2019 ;Volum 102.(5-8) s.2615-2615

Bunaziv, Ivan; Akselsen, Odd Magne; Frostevarg, Jan; Kaplan, Alexander F.H..
Application of laser-arc hybrid welding of steel for low-temperature service.
The International Journal of Advanced Manufacturing Technology 2019 ;Volum 102.(5-8) s.2601-2613

Alvaro, Antonio; Wan, Di; Olden, Vigdis; Barnoush, Afrooz
Hydrogen enhanced fatigue crack growth rates in a ferritic Fe-3wt%Si alloy and a X70 pipeline steel.
Engineering Fracture Mechanics 2019 ;Volum 219

2018

Wan, Di; Alvaro, Antonio; Olden, Vigdis; Barnoush, Afrooz
Hydrogen-assisted fatigue crack growth in ferritic steels – a fractographic study.
MATEC Web of Conferences 2018 ;Volum 165:03004. s.1-7

Viespoli, Luigi Mario; Johanson, Audun; Alvaro, Antonio; Nyhus, Bård; Sommacal, Alberto; Berto, Filippo
Tensile characterization of a lead alloy: creep induced strain rate sensitivity.
Materials Science & Engineering: A 2018 ;Volum 744. s.365-375

Viespoli, Luigi Mario; Alvaro, Antonio; Nyhus, Bård; Berto, Filippo.
Fatigue investigation of complex weldments by the means of the local strain energy density approach.
MATEC Web of Conferences 2018 ;Volum 165

Tu, Shengwen; Ren, Xiaobo; Kristensen, Tore Andre; He, Jianying; Zhang, Zhiliang.
Study of low-temperature effect on the fracture locus of a 420-MPa structural steel with the edge tracing method.
Fatigue & Fracture of Engineering Materials & Structures (FFEMS) 2018 ;Volum 41.(8) s.1649-1661

Tu, Shengwen; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang
Numerical study on the effect of the Lüders plateau on the ductile crack growth resistance of SENT specimens.
International Journal of Fracture 2018 ;Volum 214.(2) s.185-200

Tu, Shengwen; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang
A method for determining material's equivalent stress-strain curve with any axisymmetric notched tensile specimens without Bridgman correction.
International Journal of Mechanical Sciences 2018 ;Volum 135. s.656-667

Snartland, Brage Dahl; Alvaro, Antonio; Osen, Vidar; Thaulow, Christian Magnus.
Crack arrest testing at the micro-scale.
Engineering Fracture Mechanics 2018 ;Volum 201

Sezgin, Jean-Gabriel; Fjær, Hallvard Gustav; Matsunaga, Hisao; Yamabe, Junichiro; Olden, Vigdis
Hydrogen trapping in X70 structural pipeline steel and weldments.
International Journal of Offshore and Polar Engineering 2018 s.228-235

Saksala, Timo; Fourmeau, Marion; Kane, Pascal-Alexandre; Hokka, Mikko.
3D finite elements modelling of percussive rock drilling: Estimation of rate of penetration based on multiple impact simulations with a commercial drill bit.
Computers and geotechnics 2018 ;Volum 99. s.55-63

Li, Yang; Ren, Xiaobo; He, Jianying; Zhang, Zhiliang.
Constraint effect on the brittle-to-ductile transition of single-crystal iron induced by dislocation mobility.
International Journal of Mechanical Sciences 2018 ;Volum 149. s.212-223

Johanson, Audun; Viespoli, Luigi Mario; Nyhus, Bård; Alvaro, Antonio; Berto, Filippo
Experimental and numerical investigation of strain distribution of notched lead fatigue test specimen.
MATEC Web of Conferences 2018 ;Volum 165:05003. s.1-6

Horgar, Annbjørg; Fostervoll, Hans; Nyhus, Bård; Ren, Xiaobo; Eriksson, Magnus Carl Fredrik; Akselsen, Odd Magne
Additive manufacturing using WAAM with AA5183 wire.
Journal of Materials Processing Technology 2018 ;Volum 259. s.68-741

Eriksson, Magnus Carl Fredrik; Lervåg, Malin; Sørensen, Camilla; Robertstad, Andreas; Brønstad, Bård M.; Nyhus, Bård; Aune, Ragnhild; Ren, Xiaobo; Akselsen, Odd Magne
Additive manufacture of superduplex stainless steel using WAAM.
MATEC Web of Conferences 2018 ;Volum 188

Bunaziv, Ivan; Frostevarg, Jan; Akselsen, Odd Magne; Kaplan, Alexander F.H.
The penetration efficiency of thick plate laser-arc hybrid welding.
The International Journal of Advanced Manufacturing Technology 2018 ;Volum 97.(5-8) s.2907-2919

Bunaziv, Ivan; Frostevarg, Jan; Akselsen, Odd Magne; Kaplan, Alexander F.H.
Process stability during fiber laser-arc hybrid welding of thick steel plates.
Optics and lasers in engineering 2018 ;Volum 102. s.34-44

Bunaziv, Ivan; Akselsen, Odd Magne; Frostevarg, Jan; Kaplan, Alexander F.H.
Laser-arc hybrid welding of thick HSLA steel.
Journal of Materials Processing Technology 2018 ;Volum 259. s.75-87

Bunaziv, Ivan; Akselsen, Odd Magne; Frostevarg, Jan; Kaplan, Alexander F.H.
Deep penetration fiber laser-arc hybrid welding of thick HSLA steel.
Journal of Materials Processing Technology 2018 ;Volum 256. s.216-228

Alvaro, Antonio; Wan, Di; Olden, Vigdis; Barnoush, Afrooz
Hydrogen Enhanced Fatigue Crack Growth Rates in a Ferritic Fe-3wt%Si Alloy.
Procedia Structural Integrity 2018 ;Volum 13. s.1514-1520

Ali, Asghar; Pinto, Andre Luiz; Henda, Redhouane; Fagerberg, Ragnar
Influence of Co loading on structural and morphological properties of Co-doped ZnO thin films grown by pulsed electron beam ablation.
Journal of Alloys and Compounds 2018 ;Volum 731. s.181-188

Scopus - Document details - Experimental characterization of cyclic behaviour of pure lead: Temperature sensitivity and strain-rate effects
Experimental characterization of cyclic behaviour of pure lead: Temperature sensitivity and strain-rate effects.
Materials Science and Engineering: AVolume 87425 May 2023 Article number 145082

Populærartikler:

2021: Innlegg: 3D-printing er industrirevolusjonen som uteble – helt til nå | DN
2022: Gjenbruk av rør på norsk sokkel kan gi milliardgevinst - Tu.no